Underwater Solenoid
Click Here for Printer Friendly Version
Model No. 1900-104

Specifications:
 

1.  Pull force (lbs.) vs stroke (air gap): (values are approximate)

airgap=> _______ volts	062"	.125"	.188"	.250"
12vdc	22	7.5	3.5
24vdc	46	26	16	8
36vdc	55	38	26	18

 
2.  Electrical: 2 amps @ 24vdc (continuous duty)
3.  Design ambient ocean depth pressure to 4,500 psi
4.  Stainless steel welded construction
5.  Weight: 4.2 lbs.
6.  Size: 2.5" dia. x 4.0" long (plus connector)
7.  Available with choice of underwater connector
8.  Armature included.

Features:

• Seal-less, Magnetically Coupled
• The force is unaffected by the ocean pressure
• Corrosion resistant
• Meets IPX8 of IEC529

This solenoid can be used for pulling latch pins, toggles or for releasing hard ballast. Higher pull forces are accomplished by pulsing at higher voltages.

Custom products are designed and manufactured to meet customer requirements.

For catalogs or technical information click here or contact ALEX PULLOS at
Hydracon Company, Inc. PO Box 27584, Anaheim, CA 92809 USA
Tel: 714-281-2460 Fax: 714-281-1199
email: alex AT hydracon.com

 [subsea switches]  [ocean depth pressure switches]  [solenoid actuators] [solenoid valves]
[subsea corrosion resistant valves]  [ballast valves]   [home]