Metal Shell bulkhead Connectors -
Neoprene Molded Stainless Steel
Home > Underwater Connectors > Metal Shell Bulkhead Connectors
Description and Material
- 316 stainless steel
- Internal material is a glass reinforced epoxy water block insert overmolded with neoprene
- Gold plated contacts
- One to eight contacts
- Up to 5000 PSI in mated condition
- Rated up to 600 VDC
- See current capacities for ratings
Mating
- BCL mates with RMG-FS or RMK-FS
- “V” denotes socket instead of pins
- This series is not back potted unless specified at time of order
- The connector’s amperage and voltage may be limited by the amperage and voltage ratings of the cable to which the connector is molded
Installation
- All mounting surfaces require a 32 finish
- Do not exceed standard mounting torque specifications
- Align index marks
- Keep O-ring grooves clean
- Avoid O-ring cuts and nicks. Replace as required.
- Lubricate O-ring with light coat of silicone lubricant (Dow #4) or Deriena grease
- Caution, do not damage the pins in the unplugged condition
- Avoid contact with solvents
Contact Amp Capacity and Size
| AWG | Amp Capacity | Diameter (inches) |
|---|---|---|
| #16 AWG | 12 | .062 |
| #14 AWG | 15 | .093 |
| #10 AWG | 25 | .125 |