Glass Filled Epoxy Bulkhead Connectors
Home > Underwater Connectors > Glass Filled Epoxy Bulkhead Connectors
"XS" Series, "VS" Series, "LSG" Series
Description and Material
- Molded glass filled epoxy
- Gold plated contacts
- One to twelve contacts
- LSG, up to 3000 PSI in mated condition
- XSG, XSK up to 20,000 PSI in mated condition
- Rated up to 600 VDC
- See contact current capacities for ratings
Mating
- LSG, XSG, XSK mates with RMG-FS or RMK-FS
- “V” denotes sockets instead of pins
- This series is not back potted unless specified at time of order
- The connector’s amperage and voltage may be limited by the amperage and voltage ratings of the cable to which the connector is molded
Installation
- All mounting surfaces require a 32 finish
- Do not exceed standard mounting torque specifications
- Align index marks
- Keep O-ring grooves clean
- Avoid O-ring cuts and nicks. Replace as required.
- Lubricate O-ring with light coat of silicone lubricant (Dow #4) or Deriena grease
- Caution, do not damage the pins in the unplugged condition
- Avoid use in areas subject to high impact, connectors subject to chipping and cracking if exposed to high abuse conditions
- Avoid contact with solvents
Contact Amp Capacity and Size
| AWG | Amp Capacity | Diameter (inches) |
|---|---|---|
| #16 AWG | 12 | .062 |
| #14 AWG | 15 | .093 |
| #10 AWG | 25 | .125 |