Rubber Molded Series
Inline Connectors
Home > Underwater Connectors > Rubber Molded Series Inline Connectors
Description and Material
- Molded neoprene
- Gold Plated contacts
- One to twelve contacts
- Up to 20,000 PSI in mated condition
- Rated up to 600 VDC
- See contact current capacities for ratings
Mating
- RMG-FS mates RMG-MP, RMG-BCL, LSG-BCL, XSG-BCL
- RMK-FS mates RMK-MP, RNK-BCL, XSK-BCL
- “V” denotes sockets instead of pins
- Connectors in this series are provided on a standard 24” length of type SO cable unless otherwise specified
- Connector’s amperage and voltage may be limited by the amperage and voltage ratings of the cable to which the connector is molded
Installation
- Lubricate MP mating side with light coat of silicone lubricant (Dow #4) or Deriena grease
- Avoid O-ring cuts and nicks (O-ring or connector must be replaced)
- Type FS may trap water (flush with alcohol and blow dry, re-lubricate prior to use)
- Align index marks
- Accomplish mating with minimum twisting and flexing
- Caution, do not damage the pins in the unplugged condition
- Avoid contact with solvents
***- 90 degree versions available in both regular and “V” types
Contact Amp Capacity and Size
| AWG | Amp Capacity | Diameter (inches) |
|---|---|---|
| #16 AWG | 12 | .062 |
| #14 AWG | 15 | .093 |
| #10 AWG | 25 | .125 |