Check Valve (Non Chatter) 2702-100

No Chatter
“Zero” Leakage at High Back Pressures
High Tolerance to Contamination
Stainless Steel

Originally designed and built for a major aerospace firm to replace a valve that was prematurely failing due to chatter. Chatter causes premature wear and a valve can be ruined in a few hours.

Hydracon designed this check valve to provide a long service life and to survive 3,000 reverse water hammer pressure cycles. This design incorporates features justified by countless savings in replacement, maintenance and downtime costs.

Drawing 2702-100

Specifications:

Bubble-tight closure
Contamination tolerant seat
System operating pressure: 3,000 psi
Full flow. ESEOD: 0.14” (Cd: 0.38)
System fluid: liquid or gas
Ports: 1/4” male tube
Size: .75” hex x 1.8” long
Weight: < 2 oz.
Stainless steel wetted surfaces

Also available - Check Valve 2702-300 - 1" Full Flow; Check Valve 2706-100 - 2" Full Flow

Please contact us for pricing and delivery. Orders placed are custom manufactured. Products are not inventoried.